腾达试验仪器厂:
防水卷材测厚仪是检测仪器,根据GBl8173-2000《高分子防水卷材》及GBl8242-2000《弹性体改性沥青防水卷材》GB18243-2000《塑性体改性沥青防水卷材》标准中的厚度要求精心设计制造的,使用前务必仔细阅读说明书。并由**实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。
Waterproof membrane thickness gauge is a testing instrument based on GBl8173-2000"Polymer waterproof membrane"and GBl8242-2000"Elastomer modified asphalt waterproof membrane"GB18243-2000"Plastic modified asphalt waterproof membrane"The thickness in the standard requires careful design and manufacture.Please read the instructions carefully before use.It is operated by**experimental personnel to avoid injury caused by improper operation.For more information,please contact our customer service staff.
防水卷材测厚仪主要技术参数:
1、测量范围:0-10mm;
2、上测直径:Φ10±0.05m;
3、精度值:0.01mm;
4、施加压力:0.02MPa
Main technical parameters of waterproof coil thickness gauge:
1.Measuring range:0-10mm;
2.Diameter on the test:Φ10±0.05m;
3.Accuracy value:0.01mm;
4.Applied pressure:0.02MPa
防水卷材测厚仪使用方法:
1、测试前先对准表的零位,并拨动操纵杆试几次,回零后再进行测试,操作时要轻提轻放,以免损坏平台,测足及仪表。
2、用手指按下操纵杆,使测足上台,将被测片材质放在平台与测足之间,轻放操纵杆此时表的读数即为被测物的厚度。每个待测尺寸至少要取5个测量值,计算5点的平均值作为该卷材的厚度并报告A小单位值。
How to use the waterproof coil thickness gauge:
1.Align the zero position of the meter before the test,and turn the joystick to test a few times,and then perform the test after returning to the zero position.When operating,gently lift it to avoid damaging the platform,the foot and the instrument.
2.Press the joystick with your finger to bring the measuring foot to the stage,and place the material of the measured piece between the platform and the measuring foot.Lightly release the joystick at this time and the meter reading is the thickness of the measured object.Take at least 5 measurements for each size to be measured,calculate the average of 5 points as the thickness of the coil,and report a small unit value of A.
防水卷材测厚仪注意事项:
1、本仪器A卧式测量。
2、使用完毕后,用仪器罩罩好,以防尘土,防止受潮。
Note for waterproof coil thickness gauge:
1.This instrument A horizontal measurement.
2.After use,cover the instrument well to prevent dust and moisture.
微信扫一扫