腾达试验仪器厂:
一、简介:
纤维磨耗机适用于粒状木质纤维的筛分和磨损试验。由振筛系统和磨损系统组成,整机结构简单操作方便,运行时间可调。
1.Brief introduction of fiber abrasion machine:
The fiber abrasion machine is suitable for screening and abrasion test of granular wood fiber.Composed of a vibrating screen system and a wear system,the whole structure is simple and easy to operate,and the running time is adjustable.
二、结构组成:
纤维磨耗机由研磨系统、振筛系统、控制系统和电机组成。
2.Structure composition:
The fiber abrasion machine is composed of a grinding system,a vibrating screen system,a control system and a motor.
三、技术参数:
振筛系统
★筛孔直径:4mm(适用直径为6.5mm粒状木质纤维)
★筛孔直径:2.8mm(适用直径为645mm粒状木质纤维)
★振频:50Hz
★振幅:2mm
研磨系统:
★由进料口、出料口、研磨室、研磨轮等组成
★研磨轮宽度4mm,直径280mm,
★研磨室内径:300mm
★研磨轮与研磨室侧壁间距:48mm
★研磨轮卷曲:长度50mm,宽度15mm,
★研磨轮旋转平面夹角30°.
★研磨轮转速为450±50r/min~
3.Technical parameters:
Vibrating Screen System
★Sieve hole diameter:4mm(applicable to granular wood fiber with a diameter of 6.5mm)
★Sieve hole diameter:2.8mm(for granular wood fiber with a diameter of 645mm)
★Vibration frequency:50Hz
★Amplitude:2mm
Grinding system:
★Composed of inlet,outlet,grinding chamber,grinding wheel,etc.
★Grinding wheel width 4mm,diameter 280mm,
★Grinding chamber diameter:300mm
★The distance between the grinding wheel and the side wall of the grinding chamber:48mm
★Grinding wheel curl:length 50mm,width 15mm,
★The angle of rotation of the grinding wheel is 30°.
★The grinding wheel speed is 450±50r/min~
微信扫一扫