腾达试验仪器厂：

　　沥青动力粘度计是沥青粘度检测仪器，适用于用真空减压毛细管粘度计测定粘稠石油沥青的动力粘度，非另有注明,试验温度为60℃，真空度为300mmHg。

　　Asphalt dynamic viscometer is a test instrument for measuring the viscosity of asphalt.It is suitable for measuring the dynamic viscosity of viscous petroleum asphalt with a vacuum decompression capillary viscometer.Unless otherwise specified,the test temperature is 60℃and the vacuum degree is 300mmHg.

　　沥青动力粘度计用途及适用范围：

　　沥青动力粘度计（真空减压毛细管法）是按照中华人民共和国行业标准JTJ052《公路工程沥青及沥青混合料试验规程》中T 0620《沥青动力粘度试验（真空减压毛细管法）》，及中华人民共和国石油化工行业标准SH/0557《石油沥青粘度测定法（真空毛细管法）》规定的要求设计制造的。也适用于以真空毛细管法，试验温度为60℃，真空度为300mmHg(40Kpa)，粘度在0.0036～20.000Pa.s范围的其它物质。

　　Asphalt dynamic viscometer uses and scope of application

　　Asphalt Dynamic Viscometer(Vacuum Decompression Capillary Method)is in accordance with T 0620"Asphalt Dynamic Viscosity Test(Vacuum Decompression Capillary Method)"in the industrial standard of the People's Republic of China JTJ052"Testing Methods for Asphalt and Asphalt Mixtures of Highway Engineering",And the People's Republic of China petrochemical industry standard SH/0557"Petroleum asphalt viscosity determination method(vacuum capillary method)"designed and manufactured.It is also suitable for other substances with vacuum capillary method,test temperature is 60℃,vacuum degree is 300mmHg(40Kpa),viscosity is 0.0036～20.000Pa.s.

　　沥青动力粘度计技术参数：

　　★控温范围：室温－100℃精度：±0.01℃

　　★记时范围：0－999.9S记时精度：≤0.05S

　　★输入功率：2.1KW

　　★真空度：300mmHg±0.5mmHg

　　★外形尺寸：780X520X940mm

　　★重量：71KG

　　★电源电压：220V

　　★环境温度：5～40℃

　　★环境湿度：≦85﹪

　　Technical parameters of asphalt dynamic viscometer:

　　★Temperature control range:room temperature－100℃accuracy:±0.01℃

　　★Timing range:0-999.9S Timing accuracy:≤0.05S

　　★Input power:2.1KW

　　★Vacuum degree:300mmHg±0.5mmHg

　　★Dimensions:780X520X940mm

　　★Weight:71KG

　　★Power supply voltage:220V

　　★Ambient temperature:5～40℃

　　★Ambient humidity:≦85﹪

　　沥青动力粘度计主要特点：

　　★具有贮存和打印计算结果和测量时间的功能；

　　★具有自动进行温度和真空度控制的功能；

　　★具有自动记时功能；

　　★具有在液晶显示屏自动进行测试评估和显示测试结果功能。

　　Main features of asphalt dynamic viscometer:

　　★It has the function of storing and printing calculation results and measuring time;

　　★With automatic temperature and vacuum control function;

　　★With automatic timekeeping function;

　　★With automatic test evaluation and display test results on the LCD screen.

　　沥青动力粘度计安装及工作条件：

　　★仪器安装

　　1、打开包装箱，将仪器放置在通风、平整且稳固的试验台上，检查仪器外观是否受到损害。

　　2、按照装箱单清点仪器的配、附件。

　　3、毛细管等玻璃器皿等应轻拿轻放，防止损坏。

　　★使用条件

　　1、工作电源：AC220V±10%、50Hz。

　　2、环境温度：5℃～50℃。

　　3、相对湿度：≤85%。

　　4、环境要求：周围环境不存在影响仪器正常工作的机械震动、腐蚀性气体、污染、电磁干扰等。

　　5、供电电源：供电电源线应有良好的接地端。

　　SYD-0620 asphalt dynamic viscometer installation and working conditions:

　　★Instrument installation

　　1.Open the packing box and place the instrument on a ventilated,flat and stable test bench to check whether the appearance of the instrument is damaged.

　　2.Inventory the equipment and accessories according to the packing list.

　　3.Glassware such as capillaries should be handled gently to prevent damage.

　　★Conditions of use

　　1.Working power:AC220V±10%,50Hz.

　　2.Ambient temperature:5℃～50℃.

　　3.Relative humidity:≤85%.

　　4.Environmental requirements:There is no mechanical vibration,corrosive gas,pollution,electromagnetic interference,etc.that affects the normal operation of the instrument in the surrounding environment.

　　5.Power supply:The power supply cable should have a good ground terminal.

　　沥青动力粘度计结构及工作原理：

　　★结构

　　⑴毛细管插入口⑵总电源开关⑶真空泵开关⑷试验接管⑸打印机⑹液晶显示屏⑺真空减压控制器阀门开关I/Ⅱ/Ⅲ/Ⅳ⑻玻璃浴缸⑼温度计插口⑽水浴温控仪⑾液晶显示调节按钮⑿真空压力指示⒀抽真空指示灯⒁计时/回零按钮插空

　　★工作原理：

　　由温度控制系统、真空减压系统、计时系统、数据处理系统和贮存打印系统等构成。能自动完成温度控制、真空减压控制、计时功能，并在测量结束时贮存和打印计算结果。

　　Structure and working principle of asphalt dynamic viscometer:

　　★Structure

　　⑴Capillary insertion port⑵General power switch⑶Vacuum pump switch⑷Test takeover⑹Printer⑹LCD display⑺Vacuum decompression controller valve switch I/Ⅱ/Ⅲ/Ⅳ⑻Glass bathtub⑼Thermometer socket⑽Water bath temperature controller⑾LCD display adjustment Button⑿Vacuum pressure indicator⒀Vacuum indicator⒁Timer/zero button

　　★Working principle:

　　It consists of temperature control system,vacuum decompression system,timing system,data processing system and storage printing system.It can automatically complete temperature control,vacuum decompression control,and timing functions,and store and print calculation results at the end of the measurement.

　　沥青动力粘度计操作规程：

　　★测试前的准备

　　1、使用本仪器前应仔细阅读使用说明书。

　　2、仔细阅读中华人民共和国交通行业标准JTJ052《公路工程沥青及沥青混合料试验规程》中的T0623《沥青动力粘度试验（真空减压毛细管法）》或中华人民共和国石油化工行业标准SH/0557《石油沥青粘度测定法（真空毛细管法）》，了解并熟悉标准所阐述的试验方法、试验步骤和试验要求。

　　3、按标准所规定的要求，准备好试验用的各种试验器具、材料等。

　　4、检查本仪器的工作状态，使其符合说明书所规定的工作环境和工作条件。

　　5、检查本仪器的外壳，必须处于良好的接地状态。

　　★仪器操作

　　1、将玻璃浴缸内加入足量的水（水面离箱盖约30mm）。当电源开关上有灯显示，电路已接通。

　　2、按下控温仪面板上的“设定”键，旋转设定旋钮，使温控仪上显示60.00℃，再按一下“设定”键，温度控制系统即开始恒温控制并使水浴的温度恒定于60.00℃±0.01℃。

　　3、将毛细管和试样置于烘箱中（135℃±5℃）加热30分钟后，把沥青试样从装料管A注入毛细管粘度计，试样应不粘在管壁上，并使试样液面在装料线处±2mm之内，再将装好试样的毛细管粘度计放回烘箱中（135℃±5℃），保温10min±2min以使管中试样所产生的气泡逸出。

　　4、从烘箱中取出毛细管粘度计，在室温下冷却2min后，安装在保持试验温度的水浴中，其位置应使I标线在水浴液面以下至少为20mm，确认真空阀门关闭并将真空管接至毛细管一端。

　　Asphalt dynamic viscometer operating procedures:

　　★Preparation before testing

　　1.Read the instruction manual carefully before using the instrument.

　　2.Carefully read T0623"Asphalt Dynamic Viscosity Test(Vacuum Decompression Capillary Method)"in the Transportation Industry Standard of the People's Republic of China JTJ052"Testing Methods for Asphalt and Asphalt Mixtures of Highway Engineering"or the People's Republic of China Petroleum Industry Standard SH/0557 Petroleum Bitumen Viscosity Method(Vacuum Capillary Method)"to understand and be familiar with the test methods,test procedures and test requirements described in the standard.

　　3.According to the requirements specified in the standard,prepare various test instruments and materials for testing.

　　4.Check the working status of the instrument to make it comply with the working environment and conditions specified in the instructions.

　　5.Check the case of the instrument,it must be in a good grounding state.

　　★Instrument operation

　　1.Add a sufficient amount of water to the glass bathtub(the water surface is about 30mm away from the cover).When there is a light on the power switch,the circuit is on.

　　2.Press the"Set"key on the panel of the temperature controller,turn the setting knob to display 60.00℃on the temperature controller,and then press the"Set"key again,the temperature control system will start the constant temperature control and make the water bath The temperature is constant at 60.00℃±0.01℃.

　　3.Put the capillary tube and the sample in an oven(135°C±5°C)for 30 minutes,then inject the asphalt sample from the filling tube A into the capillary viscometer.The sample should not stick to the tube wall,and the test The sample liquid level is within±2mm at the loading line,and then return the capillary viscometer with the sample back to the oven(135℃±5℃),and keep it for 10min±2min to allow the bubbles generated in the tube to escape.Out.

　　4.Take the capillary viscometer out of the oven,and cool it at room temperature for 2 minutes,then install it in a water bath that maintains the test temperature.Its position should be at least 20mm below the liquid level of the water bath.Make sure the vacuum valve is closed and the vacuum tube is connected To the end of the capillary.