腾达试验仪器厂;

　　一、触摸屏粘度计主要特点：

　　①采用ARM技术，内置Linux系统。操作介面简洁明了，通过测试程序的创建和数据分析，快速而方便地进行粘度测试；

　　②粘度测值准确：每个量程都用计算机自动校准，精度高，误差小；

　　③显示内容丰富：除了粘度（动力粘度和运动粘度）外，还有温度、剪切速率、剪切应力，测量值占满量程值百分比（图形显示）、量程溢出报警、自动扫描、当前转子转速组合下的粘度测量范围、日期、时间等。并可在已知密度的情况下显示运动粘度，满足用户的不同测量要求；

　　④功能齐全：可定时测量、自建30组测试程序、存取30组测量数据、实时显示粘度曲线、打印数据和曲线等；

　　⑤前置水平仪：水平调节直观方便；

　　⑥无级调速：RV1T系列:0.3-100转，共有998种转速

　　RV2T系列：0.1-200转，共有200种转速

　　⑦显示剪切速率对粘度的曲线：在计算机上实时显示，也可显示时间或温度对粘度的曲线

　　⑧可选配Pt100的温度探头：测温范围宽，从-20到300℃，测温精度0.1℃；

　　⑨可选配件丰富：粘度计专用恒温浴槽、恒温杯、打印机、标准粘度样品（标准硅油）等；

　　⑩中英文操作系统。

　　DV1T/DV2T系列无级调速触屏旋转粘度计可测量的范围非常大，从10 mPa.S到32000万mPa.S，几乎涵盖了大部分的样品。使用R系列的圆盘转子，和美国博力飞的同类型粘度计一样，可替代使用。

　　广泛应用于油漆、涂料、化妆品、油墨、纸浆、食品、油品、淀粉、胶黏剂、乳胶、生化制品等等行业。

　　I.Main characteristics of touch screen viscometer:

　　①Adopt ARM technology and built-in Linux system.The operation interface is simple and clear.Through the creation of test programs and data analysis,the viscosity test can be performed quickly and easily;

　　②Accurate viscosity measurement:each range is automatically calibrated by computer,with high accuracy and small error;

　　③Rich display content:In addition to viscosity(dynamic viscosity and kinematic viscosity),there are temperature,shear rate,shear stress,measured value as a percentage of full scale value(graphic display),range overflow alarm,automatic scanning,current rotor speed Combined viscosity measurement range,date,time,etc.It can display kinematic viscosity under the condition of known density to meet different measurement requirements of users;

　　④Complete functions:it can measure time,build 30 test programs,access 30 sets of measurement data,display viscosity curve,print data and curve in real time;

　　⑤Front level meter:level adjustment is intuitive and convenient;

　　⑥Stepless speed regulation:RV1T series:0.3-100 rpm,a total of 998 speeds

　　RV2T series:0.1-200 rpm,with a total of 200 speeds

　　⑦Show the curve of shear rate vs.viscosity:real-time display on the computer,and also the curve of time or temperature vs.viscosity

　　⑧Optional Pt100 temperature probe:wide temperature measurement range,from-20 to 300℃,temperature measurement accuracy of 0.1℃;

　　丰富Abundant optional accessories:constant temperature bath for viscometer,constant temperature cup,printer,standard viscosity sample(standard silicone oil),etc.;

　　⑩Chinese and English operating system.

　　The DV1T/DV2T series stepless speed-adjustable touch screen rotary viscometer can measure a very large range,from 10 mPa.S to 320 million mPa.S,covering most of the samples.The R series disk rotor is the same as the same type of viscometer from Bolivia in the United States,which can be used instead.

　　Widely used in paint,coating,cosmetics,ink,pulp,food,oil,starch,adhesive,latex,biochemical products and other industries.

　　触摸屏粘度计技术参数:

　　★控制/显示方式：5英寸彩色触摸屏

　　★转速（r/min）：0.3-100无级变速，共有97个转速可选

　　★测量范围mPa.s

　　RVDV-1T：100-1300万

　　HADV-1T：200-2600万

　　HBDV-1T：800-10400万

　　★转子：R2–R7（6个，标配）

　　R1（选配）（测量低于下限的粘度，需选配R1转子）

　　★样品用量：500ml

　　★测量误差：±1%（牛顿液体）

　　★重复误差：±0.5%（牛顿液体）

　　★显示剪切应/剪切速率：标配

　　★定时功能：标配

　　★实时显示：粘度曲线、剪切速率-粘度曲线、温度-粘度曲线、时间-粘度曲线

　　★运动粘度：需输入样品的密度

　　★温度测量功能：标配温度探头接口（需要选配温度探头）

　　★自动扫描功能：自动扫描并推荐转子与转速的优先组合

　　★测量范围：自动显示所选择的转子与转速的组合可测量的粘度范围

　　★自建测量程序：可保存30组（包括转子、转速、温度、时间等）

　　★保存测量结果：可保存30组数据（含粘度、温度、转子、转速、剪切速率、剪切应力、时间、密度、运动粘度等）

　　★打印：数据、曲线可打印（标配有打印接口，需选购打印机）

　　★数据输出接口：RS232

　　★恒温部件：选件（含各种粘度计专用恒温槽、恒温杯、）

　　★工作电源：宽电压工作（110V/60Hz或220V/50Hz）

　　★外形尺寸：300×300×450（mm）

　　Touch screen viscometer technical parameters:

　　★Control/display mode:5 inch color touch screen

　　★Speed(r/min):0.3-100 stepless speed change,97 speeds are available

　　★Measuring range mPa.s

　　RVDV-1T:1-13 million

　　HADV-1T:2-26 million

　　HBDV-1T:8-10 million

　　★Rotor:R2-R7(6,standard)

　　R1(optional)(to measure viscosity below the lower limit,R1 rotor is required)

　　★Sample dosage:500ml

　　★Measurement error:±1%(Newton liquid)

　　★Repeat error:±0.5%(Newton liquid)

　　★Shear response/shear rate:standard

　　★Timer function:standard

　　★Real-time display:viscosity curve,shear rate-viscosity curve,temperature-viscosity curve,time-viscosity curve

　　★Kinematic viscosity:Need to input the density of the sample

　　★Temperature measurement function:Standard temperature probe interface(requires optional temperature probe)

　　★Automatic scanning function:Automatically scan and recommend the priority combination of rotor and speed

　　★Measuring range:Automatically display the measurable viscosity range of the selected rotor and speed combination

　　★Self-built measurement program:30 groups can be saved(including rotor,speed,temperature,time,etc.)

　　★Save measurement results:30 sets of data(including viscosity,temperature,rotor,speed,shear rate,shear stress,time,density,kinematic viscosity,etc.)

　　★Printing:Data and curve can be printed(standard with print interface,need to purchase printer)

　　★Data output interface:RS232

　　★Constant temperature parts:optional(including various constant temperature tanks,constant temperature cups,etc.)

　　★Working power:wide voltage operation(110V/60Hz or 220V/50Hz)

　　★Dimensions:300×300×450(mm)