腾达试验仪器厂：

　　厚漆腻子稠度测定仪是腻子检测仪器，用来测定厚漆或腻子之稀稠度,简便、直观、准确。

　　Thick paint putty consistency measurement is the best putty detection instrument for determining the thin consistency of thick paint or putty,which is simple,intuitive and accurate.

　　厚漆腻子稠度测定仪结构及工作原理:.

　　取定量体积(20ml)的荣计达仪器试样,放在两玻璃板之间,借助重量一定的砝码压力,经过一定的时间,视试样被压的流展程度,扩散之直径来表示其稠度,若流展程度差,扩散直径小的则说明其稠度高,反之,则说明其稠度低,是对比不同试样荣计达仪器稀稠度的有效识别工具。

　　Thick paint putty consistency tester structure and working principle:.

　　Take a quantitative volume(20ml)of the Rong Jida instrument sample and place it between two glass plates.With a certain weight pressure,after a certain period of time,it can be expressed according to the degree of spreading of the sample and the diameter of the diffusion.Its consistency,if the degree of spread is poor,and the diffusion diameter is small,it means that it has a high consistency;otherwise,it means that its consistency is low,and it is an effective identification tool for comparing the thin consistency of different samples.

　　QCT厚漆腻子稠度测定仪规格及使用要求:

　　1、唧筒内径为29.7mm,深度为29mm,保证唧筒容积为20.07ml。

　　2、上玻璃压板为200×200mm,厚度为5mm,板上刻有直径5-16cm的圆圈。

　　3、砝码重量为2000g。

　　4、使用环境温度为25±1℃,相对湿度60%―70%。

　　5、试验用漆刀、秒表(自备)。

　　QCT thick paint putty consistency tester specifications and use requirements:

　　1.The inner diameter of the drum is 29.7mm,the depth is 29mm,and the drum volume is guaranteed to be 20.07ml.

　　2.The upper glass pressing plate is 200×200mm,the thickness is 5mm,and a circle with a diameter of 5-16cm is engraved on the plate.

　　3.The weight is 2000g.

　　4.The operating environment temperature is 25±1℃,and the relative humidity is 60%-70%.

　　5.Lacquer knife and stopwatch for test(provided).