腾达试验仪器厂:
实验室砂磨机是检测仪器,用于实验室内涂料填加料的粉碎研磨。利用研磨与试料在罐内急速旋转。翻动产生强烈的拉剪和冲击,以达到试料的研磨、分散。
The laboratory sand mill is a testing instrument for the grinding and grinding of coatings in the laboratory.Grind and sample quickly rotate in the tank.Turning produces strong pull-shear and impact to achieve the grinding and dispersion of the sample.
实验室砂磨机技术参数:
★搅拌器转速1400r/min
★研磨罐尺寸:100×200mm
★容积;1.5L
★磨料:直径2-4.5mm钢化玻璃球
★电源:380V 50HZ
★应用性能:磨料:500-700g
★试料:500-700g
★外形尺寸:396X223X700mm
★产品总重量:70KG
★试料经研磨分散后细度可达25μm以下
Technical parameters of laboratory sand mill:
★Agitator speed:1400r/min
★Grinding tank size:100×200mm
Volume;1.5L
★Abrasive:Tempered glass ball with diameter of 2-4.5mm
★Power supply:380V 50HZ
★Application performance:Abrasive:500-700g
★Sample:500-700g
★Dimensions:396X223X700mm
★Total product weight:70KG
★The fineness of the sample can be less than 25μm after grinding and dispersion.
实验室纳米砂磨机特点:
★**小的研磨腔体,适合**小批量的快速研磨;
★自循环式研磨工艺,无需泵浦,残留**少,小批量200ml;
★研磨部分可选用不同材料。如:氧化锆、碳化硅、氧化铝、PU、耐磨合金;
★采用自主研发高性能双端面机械密封,安全可靠无泄漏;
★可采用0.2-2.0mm研磨介质,产品细度可达100-2000nm;
★采用特殊的涡轮加速器,研磨效率**高,粒径分布狭
Laboratory nano sand mill features:
★**Small grinding cavity,suitable for fast grinding of small batches;
★Self-circulating grinding process,no pump required,minimal residue,200ml in small batches;
★The grinding part can be made of different materials.Such as:zirconia,silicon carbide,alumina,PU,wear-resistant alloys;
★Adopt independent research and development of high-performance double-end mechanical seal,safe and reliable without leakage;
★0.2-2.0mm grinding medium can be used,and the product fineness can reach 100-2000nm;
★Using a special turbo accelerator,the grinding efficiency is**high,and the particle size distribution is narrow
实验室砂磨机主要类型:
★与传统工业生产用砂磨机类似,
★按照安装结构区分有:立式、卧式等;
★按照研磨腔内部转子结构区分有:叶片式、棒销式、涡轮式、涡轮棒销式等;
★按照研磨腔体内部材质区分有:合金钢式、钨钢式、陶瓷式、硬朔料式等;
★按照研磨**小细度来区分有:纳米式(研磨颗粒细度达到100纳米以下)、非纳米式等;
Laboratory sand mill main types
★Similar to the sand mill for traditional industrial production,
★Divided according to the installation structure:vertical,horizontal,etc.;
★According to the rotor structure inside the grinding chamber,there are:blade type,rod pin type,turbine type,turbine pin type,etc.;
★According to the internal materials of the grinding cavity,there are:alloy steel type,tungsten steel type,ceramic type,hard material type,etc.;
★According to the grinding**small fineness,it is divided into:nano-type(grinding particle size below 100 nanometers),non-nano-type,etc.;
微信扫一扫