腾达试验仪器厂：

　　橡胶压缩永久变形测定仪是测量橡胶,硫化橡胶,热塑性橡胶的**设备，使用前务必仔细阅读说明书。

　　Rubber compression permanent deformation tester is the best equipment for measuring rubber,vulcanized rubber and thermoplastic rubber.Please read the manual carefully before use.

　　橡胶压缩永久变形测定仪橡胶压缩永久变形器概述

　　试验器由平行钢板限制器和紧固件组成,符合GB7759、ISO815要求,用于硫化橡胶,热塑性橡胶在常温,高温和低温条件下,以一定压缩率,经一定的压缩时间后测定橡胶变形量。

　　Rubber compression set

　　The tester consists of parallel steel plate limiters and fasteners,which meet the requirements of GB7759 and ISO815.It is used for vulcanized rubber.Thermoplastic rubber is measured at room temperature,high temperature and low temperature with a certain compression rate and a certain compression time to determine the rubber deformation.

　　橡胶压缩永久变形测定仪技术参数:

　　★试样:

　　A型直径29mm高度12.5mm

　　B型直径13mm高度6.3mm

　　★限制器高度:试样类型A B

　　压缩率25%时9.3～9.4 4.7～4.8

　　压缩率15%时10.6～10.7 5.3～5.4

　　压缩率10%时11.25～11.3 5.65～5.7

　　★外形尺寸:直径115mm高110mm

　　★重量:10Kg

　　Technical parameters of rubber compression permanent deformation tester:

　　★Sample:

　　Type A diameter 29mm height 12.5mm

　　Type B diameter 13mm height 6.3mm

　　Limiter height:sample type A B

　　When the compression rate is 25%9.3 to 9.4 4.7 to 4.8

　　When the compression rate is 15.6 to 10.7 5.3 to 5.4

　　When the compression ratio is 10.25～11.3 5.65～5.7

　　★Dimensions:115mm in diameter and 110mm in height

　　★Weight:10Kg